Your One-Stop Machine Shop
Engine Repair & Rebuild
Our journeymen are experts at engine block, cylinder head, rod, and crankshaft machine work. Their skill and attention to detail ensures every aspect of a repair or build - from cleaning, crack detection, and even engine balancing - is completed to industry standards or better. To ensure our engine work meets your high expectations, we can arrange for dyno testing to measure your engine's torque or power.
Hi-Performance Engines
Get the performance you deserve on the road or track. Let us build your hi-performance engine to your exact specifications. We specialize in custom crate engines with carbureted or aftermarket fuel injection systems.
Engines & Engine Parts
More than a machine shop, we are your engine and engine parts store. We sell engines and parts for domestic, import, light diesel automotive, and marine. If you are all about customization, we can create custom stock and performance engine kits to spec. For big power, look to us for cylinder head porting, hi-performance sleeving, and stroke clearance.
Brake Drum & Rotor Turning
Extend the life of your brake drums and rotors with machining-to-spec services executed by our experienced team. Drop off your drums and discs at your nearest Lordco Auto Parts machine shop or retail location, and we will take care of the rest. This service is available on-site at select store locations as well.
Flywheel Grinding
Before deciding to replace a flywheel yourself, take it to a machine shop or Lordco Auto Parts retail location near you. Our store representatives will send your flywheel to our machinists for resurfacing to exact manufacturer specifications. Once your flywheel is ready, we will send it back to the store for convenient pick up by you. This service is available on-site at select store locations as well.
Request A Quote
BY PHONE
Contact a shop manager at our full-service machine shops to request a quote.
Mission, BC: (604) 826-4362
Maple Ridge, BC: (604) 467-3444
BY EMAIL
Download, complete, and submit the form for the service you require to lordco102@lordco.com:
Services Menu
Every job will be billed at pricing plus shop fees, which includes labour, waste removal and shop supplies. Prices are subject to change. We recommend contacting the machine shop or requesting a quote to confirm pricing or an estimate. Prices are subject to change without notice. Website pricing may not be accurate.
- Gas Engines
- Diesel Engines
SHOP FEES
Standard Costs
Pricing*
Labour
$150/Hour
Waste Removal
3% Charge (Before Tax Total)
Shop Supplies
5% Charge (Before Tax Total)
*Minimum half hour labour charge for all machine work.
PARTS CLEANING
Jet Wash Cleaning
Pricing
Cylinder Heads
$75
Passenger Car or Light Truck Blocks
$150
Intake Manifolds and Individual Small Parts
Time Basis
Hot Tank
Pricing
Glass Beading & Steel Shot Parts
Time Basis
Intake Manifolds
$125
Cylinder Heads
$75
Passenger Car or Light Truck Blocks
$175
Large Blocks
$225
Complete Engine (4 Cylinder/6 Cylinder)
$325
Complete Engine (8 Cylinder)
$375
*Prices are for parts ready cleaning only. Additional charges may apply for extra work.
CYLINDER HEADS
Pressure Testing
Pricing*
Cylinder Heads
(Note: Heads must be clean and oil free or extra charge.)
$125/Head
Marine Exhaust Manifolds
$85
Vacuum Test
$35
*Prices may vary on certain applications.
Crack Detection - Magnaflux Inspections
Pricing
Cylinder Heads
(Note: Heads must be clean and oil free or extra charge.)
$45
Connecting Rods (automotive)
$15/Each
Passenger Car Blocks
$85
Sonic Test V8
$250
*Degreasing of parts is mandatory and charged separately.
Valve Grinds
Pricing*
4 Cylinder OHV (V8) Non-adjustable Valve
$225
4 Cylinder 8 Valve Cylinder Head
$175
4 Cylinder 12 Valve Cylinder Head
$295
4 Cylinder 16 Valve Cylinder Head
$395
Subaru 4V
$225/Head
V10 Ford 3V
$345/Head
Volkswagen 20V
$525
6 Cylinder OHV Passenger Head
$260
6 Cylinder 24 Valve Cylinder Head
$495
V8 32 Valve
$495/Each
Harley Davidson Cylinder Head
$225/Each
Valve adjustments on OHC Cylinder Head
Time Basis
Air Cooled VW 4 Valve
$175
*Prices do not include Re & Re of camshafts, rockers or Valve adjustments
Valve Guide Work
Pricing*
Re & Re Guide & Fit to Valve Stem
$15.50/Each
Integral Guide
$20/Each
Hone Guides with Sunnen Guide Hone
Time Basis
Ream Guides
$14/Each
Valve Seat Installation
Pricing*
Install 1 Valve Seat
$75/Each
Install 2 or More Valve Seats
$30/Each
*Price does not include price of valve seat or valve seat angle reface.
Cylinder Head Work
Pricing*
RE & RE Cam and Buckets/Set Valve Lash Mechanical Lifter
$150/Hour
Remove Old Seals and Install New
$135
Straight RE & RE Cam Shaft
$45/Cam
RE & RE with Cam and Buckets
$150/Cam
Reface Valves
$15/Each
RE & RE Rocker Studs
Time Basis
Machine for Positive Valve Stem Seals
Time Basis
Machine Seats for Oversized Valves
50% of Valve Grind
Install Screw in Studs V8
$175/Each Head
*Price does not include parts.
Resurfacing
Pricing*
Cylinder Heads 4 Cylinders/V8
$125
Cylinder Heads - Inline 6 Cylinders
$145
To Remove .025-.040
Plus 50%
To Remove .040-.080
Plus 100%
Angle Milling
Time Basis
Resurface Exhaust Manifold (Belt Sander)
$125
Resurface Exhaust Manifold (Surface Grind)
$175
Resurface 2 Piece 6 Cylinder Manifold
$250
Resurface V8 Intake Manifold
$250
Cylinder Block Surface Grinding
$250
Cylinder Block Surface Grinding 4 or 6 Cylinder
$195
4 Cylinder Block Decking with Timing Cover
$250
*Prices may vary on certain applications.
Block Work
Cylinder Rebore (includes finish honing)
Pricing*
Reboring Automotive Cylinders
$65/Cylinder
Reboring to Exceptional Oversize
$97.50/Cylinder
Boring & Honing with Torque Plates
Extra $175
Volkswagen VR6 Boring
$510
Stroker Mock Up & Clearance Block
$150/Hour
Hone Cylinder Only
$35/Each
*Stripping blocks of head studs, valves, gears, etc. billed at shop hourly rate.
Align Honing Blocks
Pricing
4 Cylinder/V6/V8 Blocks up to 3½" Diameter Housingv
$295
6 Cylinder Inline Blocks (passenger car)
$295
3½" - 4" Housing
$325
Resize Main Line Only (no cap cutting)
$200
Cap to Block Fitting (extra)
Time Basis
LS/HEMI with Studs
$450
Align Boring Block
POA
Cylinder Sleeve Installation
Pricing*
1 or 2 Sleeves Installed
$225/Each
Counterbore Block
$45/Each
Performance Sleeving
POA
V8 Darton Sleeve
POA
*Pricing includes boring the block, installing sleeve, and boring the sleeve to finished size. It does not include price of sleeves.
Connecting Rods (Resizing)
Pricing
Resize One Connecting Rod Only
$50
Passenger Car/Medium-duty Truck Connecting Rods in Sets
$30/Each
Shot Peen Connecting Rods (sets)
$75
Pin Fitting & Rod Aligning
Pricing*
Single pin up to 1" Diameter
$75
4, 6, or 8 Cylinder Sets
$30/Each
*Pricing does not include bushings.
Press Fit Piston Pins (dismantle, fit to new pistons & align rods)
Pricing
1 Piston Only
$75/Each
2 or More Piston
$30/Each
Cam Bearing Installation
Pricing
Re & Re Cam Bearings
$25/Each
Re & Re Frost Plugs
$85/Per Set
HEMI Bearings
$30/Each
Crankshaft Grinding (includes polishing)
Pricing*
4 Cylinder, V8 Passenger and Light Trucks
$295
6 Cylinder with 4 Mains
$325
6 Cylinder with 7 Mains
$375
Grind Crankshaft Thrust Faces for Oversize Bearing
$75
Polish Crankshaft (passenger or light truck)
$110
Polish Large Crankshaft
POA
*Pricing does not include RE & RE counterweights, gallery plugs, or magnaflux inspections, etc.
GENERAL MACHINING
Engine Balancing
Pricing
4 Cylinder/V6/V8
$395
Flywheel Balancing
$150
Flywheel Balancing with Clutch
Add $50
Install Mallory
Time Basis
Turn Rotors
Pricing
Small Passenger Car
$45/Each
Large Passenger Car
$65/Each
Truck
$65/Each
Performance Slotted/Cross-Drilled
$85/Each
2-Piece Performance
$150/Each
Brake Drum Turning
Pricing
Up to 13” Diameter
$35
13 to 16” Diameter
$55
Any Drum 4” Wide or Wider
$18/Inch Width
Turn Backing Plates Connected to Brakes
$55/Each
Service available on-site at the following store locations: Grand Forks, Mission, Merritt, Oliver, Penticton, and Summerland Find a store offering machining services near you.
Flywheel Grinding
Pricing
Flat
$100
Step
$130
Re & Re Dowels
$8/Each
Service available on-site at the following store locations: Castlegar, Campbell River, Chase, Chilliwack (Yale), Courtenay, Cranbrook, Creston, Duncan, Golden, Grand Forks, Hope , Merritt, Mission, North Kamloops, Oliver, Parksville, Penticton, Prince George, Quesnel, Salmon Arm Summerland, Trail, and Vernon. Clearbrook, Creston, East Kelowna, Fruitvale, Grand Forks, Hope, Merritt, Mission, Nelson, Oliver, Osoyoos, Penticton, Sardis, Summerland, Trail, Vernon, West Kelowna, and Yale. Find a store offering machining services near you.
SHOP FEES
Standard Costs
Pricing*
Labour
$150/Hour
Waste Removal
3% Charge (Before Tax Total)
Shop Supplies
5% Charge (Before Tax Total)
*Minimum half hour labour charge for all machine work.
PARTS CLEANING
Jet Wash Cleaning
Pricing*
4 Cylinder Heads
$95
6 Cylinder Heads
$125
Additional Diesel Parts
Time Basis
*Prices are for parts ready for cleaning cam bearings, frost plugs, Valves etc. already removed. Stripping of these items charged additionally at shop rates.
CYLINDER HEADs
Pressure Testing
Pricing*
Heads 4 Cylinder
$225
Heads 6 Cylinder
$275
*Heads must be cleaned and oil free, cleaning.
Magnaflux Crack Detection
Pricing*
Heads 4 Cylinder
$75
Heads 6 Cylinder
$85
Blocks 6 & V8
$125
Crankshafts Wet Mag
$125
Connecting Rods
$25
*Degreasing of parts is mandatory and is charged separately.
Resurfacing
Pricing*
Exhaust 4 Cylinder Manifolds (belt sander)
$150
Exhaust 4 Cylinder Manifolds (machine)
$225
Exhaust 6 Cylinder Manifolds (belt sander)
$175
Exhaust 6 Cylinder Manifolds (machine)
$250
Heads 4 Cylinder LD
$175
Heads 4 Cylinder with Recups
$250
Heads 4 Cylinder HD
$275
Heads 6 Cylinder HD
POA
Blocks 4 Cylinder
$250
Blocks 6 Cylinder
$325
Block V8
$450
*Prices may vary depending on application.
Valve Grind Operations
Pricing*
4 Cylinder LD 8 Valve
$275
4 Cylinder LD 16 Valve
$395
6 Cylinder LD 12 Valve
$395
6 Cylinder LD 24 Valve
$495
Heavy Duty
POA
*Prices do not include parts.
Valve Guide Work
Pricing*
RE & RE Valve Guides & Fit
$19/Each
Integral Guides
$25/Each
*Plus cost of guides.
Valve Guide Work
Pricing*
Valve Seat Installation
$30/Each
*Price does not include cost of valve seat or valve seat angle reface.
Sleeve Installation
Pricing*
1-2 Sleeve Installation
$225
More than 2 Sleeve Installation
$175
Counterbore
$45/Each
V8 Blocks All Cylinders Bore
$950
*Pricing includes finished bore. It does not include price of sleeves. Blocks must be cleaned or cleaning will be charged separately.
Cylinder Reboring
Pricing
4/6/V8
$85/Hole
Deglaze cylinders only
$45/Hole
Torque Plate (if available)
$225
Cam Bearings
Pricing*
RE & RE Cam Bearings
$30*/Each
*Cam bearing price not included.
Connecting Rods
Pricing*
Resize Rods
$50/Each
Pin Bushing Replacement
$45*/Each
| *Price of bushing is extra. |
GENERAL MACHINING
Crankshaft Grinding
Pricing*
4 Cylinder LD
$295
6 Cylinder LD
$475
V8 LD
$450
V8 HD
$495
Polish Cranks LD
$150
*Magnaflux and gallery plugs extra.
Flywheel Grinding
Pricing
Flat
$150
Step
$175
Transport & Tractor Flat
$250
Transport & Tractor Step
$325
Service available on-site at the following store locations: Castlegar, Campbell River, Chase, Chilliwack (Yale), Courtenay, Cranbrook, Creston, Duncan, Golden, Grand Forks, Hope , Merritt, Mission, North Kamloops, Oliver, Parksville, Penticton, Prince George, Quesnel, Salmon Arm Summerland, Trail, and Vernon. Clearbrook, Creston, East Kelowna, Fruitvale, Grand Forks, Hope, Merritt, Mission, Nelson, Oliver, Osoyoos, Penticton, Sardis, Summerland, Trail, Vernon, West Kelowna, and Yale. Find a store offering machining services near you.
Matt Rusiecki Throws It Sideways, Straight Into Formula Drift
After a persistent lifelong chase, ProAm driver Matt Rusiecki officially secured his PROSPEC license at the Final Fight Round 3, the last event of the 2025 Spec-D Drift Series and a fitting name for a physically and mentally tough journey... Read More